(1) The spark plug model is in compliance with the regulations to ensure that the thermal characteristics and the length of the screwed-in part are appropriate; the insulator skirt must be clean, free of cracks and leakage; the electrode gap should not be too large or too small; the sealing gasket is in good condition; the installation of the spark plug is required The tightness is suitable to prevent air leakage, damage to the gasket and causing the temperature of the insulator to be too high. (2) The nominal voltage of the ignition coil must comply with the specified power supply voltage. The resistance of the ignition coil must not be arbitrarily removed, nor should the resistor be short-circuited for a long period of time. The connection of the circuit shall be reliable and the outside shall be kept clean. When the temperature is found to be too high or the voltage of the flashover voltage is insufficient, the cause shall be examined in a timely manner. If the limit voltage of the regulator is too high or the gap of the contact of the breaker is too small, it shall be adjusted; If it is a fault such as a short circuit between the coils or ground, it should be replaced. (3) The contacts of the breaker shall be smooth and clean. If there is any ablation or dirt, it shall be polished and removed to ensure good contact. Contact gap should not be too large or too small, spring force of the contact arm spring should be appropriate; the cam must have good lubrication, wear should be uniform; distributor shaft can not be bent and loose phenomenon; centrifugal and vacuum adjustment device work condition should be normal The distribution cover and sub-fire head must not have cracks, and keep clean and dry to prevent leakage. (4) The capacity of the capacitor should meet the requirements, and the connection to be installed must be reliable. If it is found that the contact of the breaker is easily burned, it should be checked whether the capacitor is broken down. The external connection and the internal lead-out line are broken or in poor contact.
Our company manufactures many kinds of Pet Feeding Accessories. Such as the Pet Scoops, pet bowels and feeders and Pet Drinking Bottles. The Features of the pet drinking bottles are as the following :
It can be fixed anywhere, such as walls, wood, cages, etc.
Automatic drinking water machine. Clean, practical and elegant.
Detachable and easy to clean.
Make your pet healthy and happy.
It's convenient for the pet owner to take it out.
Pet Drinking Bottles
Pet Drinking Bottles,Water Bottle For Dogs,Dog Travel Bottle,Dog Drinking Bottle
Yangzhou Huating Brush Co., Ltd. , http://www.huatingbrush.com