When the agricultural machinery is repaired, it is often dismantled. The types and brands of the agricultural machinery are many and vary in structure. If they are disassembled, it is easy to damage the agricultural machinery. Therefore, "eight attentions" should be done when disassembling.
1, according to the different construction of agricultural machinery, consider the operating procedures in advance, so as not to invert.
2. When disassembling, proceed from outside to inside and from top to bottom.
3, special tools should be used during operation, it is forbidden to knock directly on the parts with a hammer.
4, to clarify the part of the loose direction, the precision components should be careful operation, such as the pole long-axis parts must be lifted with a rope, wrapped with cloth to prevent bending deformation and damage.
5. The removed parts should be placed on wooden racks, wooden boxes or parts trays in order, and must not be placed on the ground to prevent damage and corrosion.
6. The removed parts should be put together as far as possible according to the original structure, such as shafts, gears, screws, gaskets, positioning pins and so on.
7. For complete sets of parts or parts that cannot be exchanged, mark them before disassembling, and string them together to avoid mixing, such as gear sets, valves and valve seat tubing connections, and the parts on the valves should be plugged into the original valve body.
8. Parts that can still be used without repairs should not be disassembled and thrown loose, such as splines and gears, shafts, and bearings. In addition, to facilitate inspection of parts. The removed parts should be cleaned as necessary and then coated with engine oil to prevent rust.
1, according to the different construction of agricultural machinery, consider the operating procedures in advance, so as not to invert.
2. When disassembling, proceed from outside to inside and from top to bottom.
3, special tools should be used during operation, it is forbidden to knock directly on the parts with a hammer.
4, to clarify the part of the loose direction, the precision components should be careful operation, such as the pole long-axis parts must be lifted with a rope, wrapped with cloth to prevent bending deformation and damage.
5. The removed parts should be placed on wooden racks, wooden boxes or parts trays in order, and must not be placed on the ground to prevent damage and corrosion.
6. The removed parts should be put together as far as possible according to the original structure, such as shafts, gears, screws, gaskets, positioning pins and so on.
7. For complete sets of parts or parts that cannot be exchanged, mark them before disassembling, and string them together to avoid mixing, such as gear sets, valves and valve seat tubing connections, and the parts on the valves should be plugged into the original valve body.
8. Parts that can still be used without repairs should not be disassembled and thrown loose, such as splines and gears, shafts, and bearings. In addition, to facilitate inspection of parts. The removed parts should be cleaned as necessary and then coated with engine oil to prevent rust.
Tmax combines two different ventilation systems to ensure stable Poultry Climate Control and outstanding environment conditions for the chickens. You can thus determine the quality of the house air at any time and immediately take measures when necessary. This user-friendly climate is a must for a reliable poultry climate control in poultry growing and egg production.
Poultry Climate Control
Poultry Climate Control,Climate Control Systems,Poultry House Ventilation ,Poultry Ventilation Systems
Shandong Shine Machinery Co.,Ltd , http://www.tmaxpoultry.com