Do you still believe boxed brownies are your only option? Think again! These homemade brownies are a rich, decadent delight that are incredibly easy to whip up. In the past, I always kept a box of store-bought mix on hand for emergencies, but now I rely on this simple recipe instead. It’s absolutely fantastic, and I usually have everything I need right in my pantry!
One of my favorite things about making these brownies is how impressed people get when they learn they’re homemade. They assume it must’ve been some kind of culinary masterpiece, but trust me—it’s not! These are as straightforward as they come.
- 10 tablespoons butter
- 1 cup granulated sugar
- 3/4 cup unsweetened cocoa powder
- 1/2 teaspoon salt
- 1 teaspoon vanilla extract
- 2 large eggs, cold
- 1/2 cup all-purpose flour
- 2 tablespoons powdered sugar for dusting (optional)
- Preheat your oven to 325°F. Line an 8-inch square baking pan with parchment paper or aluminum foil, allowing some overhang on two opposite sides. This makes it easier to lift the finished brownies out of the pan later.
- Microwave the butter in 20-second intervals, stirring between each interval, until it’s fully melted and piping hot. Add the sugar, cocoa powder, and salt, mixing thoroughly. The mixture might look grainy at first, but don’t worry—it’ll smooth out once you add the eggs and flour. Stir in the vanilla extract next. Add the eggs one at a time, stirring vigorously after each addition. Once the batter appears thick, glossy, and well combined, fold in the flour. Keep stirring until everything is fully incorporated. Use a wooden spoon to beat the mixture for another 2 minutes. Pour the batter into the prepared pan and spread it evenly. Bake for 20 to 25 minutes, or until a toothpick inserted into the center comes out mostly clean. Let the brownies cool completely before removing them from the pan.
Effective Waste Water Decoloring Agent
This product is a quaternary ammonium cationic polymer.
|
Product Name:
|
Water Decoloring Agent
|
||
|
Solid Content:
|
50%~55%
|
||
|
Component:
|
Dicyandiamide-formaldehyde Resin
|
||
|
Other Names:
|
Decolorant;
Color Removal Agent; Dicyandiamide-formaldehyde Resin Flocculant |
||
|
Certificates:
|
ISO, SGS,BV
|
Service:
|
Trade Assurance protection for quality, shipment, payment
|
|
Item
|
water decoloring agent
|
|
Appearance
|
colorless or light-color sticky liquid
|
|
Dynamic viscosity (cps,20°C)
|
50-500
|
|
pH (30% water solution)
|
2.5~5.0
|
|
Solid content % ≥
|
50
|
|
Note:
|
our product can be made upon your special request.
|
1. It is mainly used for waste water treatment for textile, printing, dyeing, paper-making, mining, ink, and so on.
2. It can be used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
Application Method
1.The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The pH value of the waste water should be adjusted to 6-10 for better result.
3. When the colority and CODcr are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride is used earlier or afterwards depends on the flocculation test and the treatment process.
Decolorizing Agent,Effective Decolorizing Agent,Waste Water Decoloring Agent,Water Decolorizing Agent
Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com