Y -type filter is an indispensable filter device for conveying medium. Y -type filter is usually installed at the inlet end of pressure reducing valve , pressure relief valve, water level valve or other equipment to remove impurities in the medium. To protect the normal use of valves and equipment. Y -type filter has the characteristics of advanced structure, low resistance and convenient sewage discharge. The Y -type filter is suitable for water, oil and gas. The general water network is 18~30 mesh, the ventilation net is 10~100 mesh, and the oil network is 100~480 mesh. Â The basket filter is mainly composed of a nozzle, a main pipe, a filter blue, a flange, a flange cover and a fastener. When the liquid enters the filter blue through the main pipe, the solid impurity particles are blocked in the filter blue, and the clean fluid passes through the filter blue and is discharged from the filter outlet.
The Y -type filter is a small device that removes a small amount of solid particles in the liquid, which can protect the normal operation of the equipment. When the fluid enters the filter cartridge with a certain size filter, the impurities are blocked, and the clean filtrate is filtered by the filter outlet. Discharge, when cleaning is required, just remove the detachable filter cartridge, re-load it after processing, so it is very convenient to use and maintain. Y -type filter, also known as decontamination device and filter valve, is an indispensable device for conveying the pipeline system. Its function is to filter mechanical impurities in the medium, which can be used for rust, sand and a small amount of solid in the liquid. Filtration of particles and the like to protect the fittings on the equipment piping from wear and clogging can protect the normal operation of the equipment.
The Y -type filter is Y- shaped. One end is for passing water such as water, and one end is sediment waste and impurities. Usually it is installed at the inlet end of a pressure reducing valve , a pressure relief valve, a fixed water level valve or other equipment. The function is to remove impurities in the water to protect the normal operation of the valve and equipment. The water to be treated by the filter enters the body through the water inlet, and impurities in the water are deposited on the stainless steel filter screen, thereby generating a pressure difference. The differential pressure switch monitors the pressure difference between the inlet and outlet. When the pressure difference reaches the set value, the electric controller sends the hydraulic control valve and drives the motor signal, triggering the following actions: the motor drives the brush to rotate, the filter element is cleaned, and the control valve is opened. For the sewage discharge, the entire cleaning process only lasts for several tens of seconds. When the cleaning is finished, the control valve is closed, the motor stops rotating, the system returns to its initial state, and the next filtration process begins. Â After the equipment is installed, the technician will debug and set the filtration time and cleaning conversion time. The water to be treated enters the body through the water inlet, and the filter starts to work normally.
Y type filter product classification
1. Air filter  The polluted air is cleaned to the state required for production and living, that is, the air is cleaned to a certain degree.
2. Liquid filter  The contaminated liquid is cleaned to the state required for production and living, that is, the liquid is cleaned to a certain degree.
3. Network filter  By setting up to block spam, the information on the computer screen is as close as possible to the requirements. The principle of absorption separates light of different colors
4. Light filter to absorb some unwanted light. The above should be a mesh filter. In fact, there are many kinds of filters, such as laminated filters, sand filters, carbon filters, etc. The main principle is to use the pore size of the filter medium to intercept substances smaller than the medium pore size. Of course, some filter media also have special effects such as adsorption. Most of the filter backwashing is not so troublesome, as long as the water is introduced into the reverse backwashing filter from the end of the filtered water to achieve a good backwashing effect. This type of valve should generally be installed horizontally in the pipeline.
Y type filter related models
1 , medium temperature: 300 ( ° C );
2 , working pressure difference: 2KG;
3 , material: stainless steel ;
4 , product alias: Y -type filter ;
5 , the scope of application: liquid filtration ;
6 , connection form: flange ;
7 , type: right angle type ;
8 , flow direction: one-way ;
9. Applicable medium: water ;
10 , pressure environment: atmospheric pressure.
ZHANGJIAGANG DINSHENGLIN TRADING CO.,LTD , https://www.dslhouse.com