Good cleaning technology - Dikang product application points

When it comes to effective cleaning, using the right technique is crucial. Dikang products are designed to enhance the cleaning process and ensure optimal results. Here's a detailed guide on how to use them properly: **Soaking or Ultrasonic Cleaning** After applying Dikang products, dirt should be removed immediately—avoid letting it sit on the instrument for too long. This prevents the buildup of stubborn residue that can be harder to remove later. Prepare the correct concentration of the cleaning solution. Too strong a mix may not only be wasteful but also potentially damage the instruments. Always follow the manufacturer’s guidelines for the best performance. Ensure full immersion of the items you're cleaning. Any part that isn't fully submerged might still have dirt clinging to it, reducing the effectiveness of the cleaning process. Allow sufficient soaking time. Generally, two hours is recommended, but if the dirt is particularly heavy, you can extend this up to 24 hours for better results. Heating the solution can speed up the cleaning process. Maintain the temperature between 40–50°C to achieve the desired effect without damaging the equipment. For ultrasonic cleaning, combine Dikang products with an ultrasonic cleaner for maximum efficiency. The exact amount needed in the tank depends on the model and application, so feel free to contact us for specific details. After rinsing, dry the items immediately. Use a lint-free cloth or hot air to avoid water spots and ensure a clean finish. Testing is essential. Different types of dirt may require different concentrations, temperatures, and soaking times. Conducting tests will help you determine the most effective method for your specific needs. **Automatic Glass Washer** Before using a fully automatic glass washer, always rinse off any surface dirt first. This helps prevent clogging and ensures a more thorough clean. Place the items carefully in the washer. Avoid overloading the machine, as this can reduce the effectiveness of the cleaning cycle. Ensure there is enough space for each item to be properly cleaned and rinsed. If the dirt is acidic, consider a pre-cleaning step using an alkaline solution before applying the main cleaning agent. This helps neutralize the acid and improves overall cleaning performance. An acid rinse (neutralization) is especially important in areas with hard water. It helps maintain consistent cleaning results and prevents mineral deposits from forming on the instruments. Always use the correct volume of detergent and acid neutralizer as specified in the automatic glass washer manual. The amount required typically depends on the water flow rate and system size. Check the instructions for your washing machine to ensure you’re using the right quantity. Too little may not clean effectively, while too much can be costly and unnecessary. Finally, make sure the entire rinsing process is functioning correctly. A well-maintained machine ensures that every stage of the cleaning cycle works efficiently. Regular maintenance and checks are essential for long-term performance and reliability.

Ring Video Doorbell

Ring Video Doorbell,Home Security Doorbell Camera,Security Doorbell Camera,Ring Doorbell Camera

Shenzhen Zuomi Technology Co., Ltd. , https://www.bkvis.com