**Good Cleaning Technology – Dikang Product Application Points**
Soak or ultrasonic cleaning is a highly effective method for removing dirt from instruments. It's important to clean the dirt as soon as possible—avoid letting it sit on the instrument for too long, as this can make removal more difficult.
Always prepare the correct concentration of the cleaning solution. Too strong a solution may not only be wasteful but also potentially damage the equipment, while too weak a solution might not provide the desired results.
Make sure the product to be cleaned is fully submerged in the solution. Any part that isn’t properly soaked may still have dirt remaining, which could affect the overall cleanliness.
Allow sufficient soaking time—typically, more than two hours is recommended. If the dirt is particularly heavy, you can extend the soaking time up to 24 hours for better results.
Heating the cleaning solution can help speed up the process. If you want to reduce soaking time, maintain the solution at around 40–50°C for optimal performance.
Ultrasonic cleaning works best when combined with Dikang products. Using an ultrasonic cleaner along with Dikang solutions creates a powerful and efficient cleaning system. For specific dosing instructions, please contact us for detailed guidance.
After rinsing, dry the items immediately using a lint-free cloth or hot air blow dryer. This helps prevent water spots and ensures a clean finish.
Testing is essential when dealing with different types of dirt. Adjust the concentration of the solution, temperature, soaking time, and rinsing method accordingly. Testing will help you determine the most effective cleaning procedure for your needs.
For automatic glass washers:
Start by rinsing off any surface dirt before using the machine. This prevents large particles from clogging the system.
Place the cleaning materials carefully into the washer. Avoid overloading the machine—ensure there is enough space for each item to be thoroughly cleaned and rinsed.
If the dirt is acidic, it’s advisable to pre-clean with an alkaline solution before applying the main cleaning agent. This helps neutralize the acid and improves the overall cleaning effect.
An acid rinse (neutralization) is recommended, especially in areas with hard water. This step ensures consistent and thorough cleaning of the instruments.
It’s crucial to use the correct amount of detergent and acid neutralizer. Refer to the application manual provided with your automatic glass washer. The quantity of detergent should be proportional to the volume of circulating water in the machine.
Check the washing machine instructions to ensure you're using the right amount. Too little may not clean effectively, while too much is inefficient and costly.
Finally, make sure the entire rinsing process is working properly. A well-maintained machine ensures that every cycle performs optimally. Regular maintenance and proper operation are key to achieving the best cleaning results.
Waterproof Solar Camera,Smart Light Security Outdoor Camera,Smart Outdoor Camera,Outdoor Wifi Wireless Cameras
Shenzhen Zuomi Technology Co., Ltd. , https://www.bkvis.com